Pharmaceutical Water System: Design, Testing and Data Management
Instructor:
Charity Ogunsanya
Product ID: 705863
- Duration: 90 Min
Why Should You Attend:
This 90-minute training will guide a drug product manufacturer with effectively designing, validation and maintaining a new or existing water system. The appropriate design planning considerations, validation, types of routine tests, testing frequencies, water system maintenance and how to set an acceptable alert and action levels will be reviewed. Water test result/data management and trending which will be a guide to a steady state of control of the different water systems will be presented. This will benefit the manufacturers by helping to avoid future costly pharmaceutical water systems failure, investigations or inability to validate or achieve passing test results from a new or existing water systems emanating from design-related issues..
Learning Objectives:
Upon completion of this course you will be able to:
- List the applicable regulations and types of pharmaceutical water systems.
- Plan, define, design, and validate the various types of pharmaceutical water systems using a compliant validation protocol.
- Define and describe the types of routine tests, testing frequencies and sampling procedures associated with Pharmaceutical Water systems.
- Describe and define how to set the alert and action levels test specification for each type of test.
- Perform routine recertification of water systems, re-testing and re-evaluation.
- Perform test data management and trending.
Areas Covered in the Webinar:
Module 1:
- Introduction to current USP <1213> Pharmaceutical Water System
- Scope of the Different Water Systems
- Planning the Design of a Water System
- Planning the Validation of a Water System
Module 2:
- Routine Testing Types Associated with Water Testing Systems
- Non-routine Water Testing Program
- Defining the Water Testing Specifications
- Standard/General Practices for the Collection of Water Samples
- Testing Time Frame
Module 3:
- Water System Failures and Investigation
- Water System(s) re-certification procedure
- Water Testing Data Management and Trending
- Data Trending of Routine Water Testing
Who Will Benefit:
This training will be beneficial to professionals in the Pharmaceutical, Cell Therapy, Diagnostics, Biologics, Biotechnology and Medical Device Industries. The employees who will benefit most include personnel and management within:
- Quality Control Analyst
- Manufacturing Associates
- Facility and Utility
- Quality Assurance Analyst
- Vendors and Suppliers of Pharmaceutical Water Systems and Peripherals
- Regulatory Affairs
- Shipping and Receiving
- Materials Handling
- Supplier Quality
Charity Ogunsanya
CEO, Pharmabiodevice Consulting LLC
Charity Ogunsanya has over 30 years of extensive experience within the Pharmaceutical, Biotechnology, Biologics, Cell-Therapy, Diagnostics, Research and Development, Radio-pharmaceutical, Contract Manufacturing Organization (CMO) and Medical Device companies.
Throughout her corporate career within these diverse industries, she held various high visibility and business critical roles within the Quality and Compliance division in major Fortune 100 companies both as a Subject Matter Expert (SME), Site Manager, Multi-site Manager and Director Levels receptively. She has been a sought after expert and have been consistently hired after several competitive efforts by major fortune 100 companies to assume key roles specifically related to remediation and difficult Quality and Compliance related deficiencies associated with FDA’s Consent Decree, FDA’s Warning Letters and difficult regulatory bodies inspectional findings which is always achieved with a successful outcome. She has also been a sought after expert by various companies requesting her expertise as a known industry expert to specifically assume roles in order to perform a total overhaul, restructure, compliance remediation, re-organization, start-up processes related to Quality Systems improvements and/or enhancements. In all cases, her remediation work resulted in several successful National and International regulatory bodies’ inspections, re-inspection and new product approvals.
Her technical expertise are not limited to the interpretation, administration and set up of Quality Assurance, Quality/Compliance, Quality Engineering, Aseptic Processing, Contamination Control, Quality Control, Microbiology, Sterility Assurance, Stability, Vaccine Development, New Product Design, Product Release Testing and Medical Device Sterilization (Ethylene Oxide (EtO), Gamma, Radiation, VHP sterilization) systems and operations for compliance to various regulations.
Ms. Ogunsanya is vast in the requirements and regulations guiding new and existing products from planning through design, proof of concept, research and development, technology transfer, pre-clinical, clinical, commercial manufacturing, supply chain, regulatory filings, pre-approval inspections, licensure, government affairs, commercialization and post-approval inspections. Her expertise has been sought after by several Fortune 100 Pharmaceutical, Biotechnology, Biologics and Medical Device companies as a Quality and Compliance SME during critical national and international regulatory bodies’ routine and new product approval inspections.
She is the CEO of Pharmabiodevice Consulting LLC (www.pharmabiodeviceconsultant.com) targeted towards Quality and Compliance related remediation, enhancements and consultant services for various companies within the industry. She is a well sought after high level consultant for several international professional expert networks such as Gerson Lehrman Group, Zintro Expert Network and Intota Expert Network. She is a member of the Parenteral Drug Association (PDA), American Society of Microbiologists (ASM), and other Scientific Forums and Industry Expert Network.
More Training By Experts
- Product Stability Testing Program - Designing and Sustaining New and Existing Programs
- How to Achieve a Compliant and Effective Cleanroom Design and Facility Validation
- Performing an Effective, Robust and Compliant Sterility Failure Investigation: How to Avoid Common Mistakes
- Understanding the Basic Requirement of the Bacterial Endotoxin Testing (BET) or LAL Program
- Designing an Effective and Compliant Standard Operating Procedure (SOP) and Standard Test Method (STM)
Refund Policy
Our refund policy is governed by individual products and services refund policy mentioned against each of offerings. However in absence of specific refund policy of an offering below refund policy will be effective.
Registrants may cancel up to two working days prior to the course start date and will receive a letter of credit to be used towards a future course up to one year from date of issuance. ComplianceOnline would process/provide refund if the Live Webinar has been cancelled. The attendee could choose between the recorded version of the webinar or refund for any cancelled webinar. Refunds will not be given to participants who do not show up for the webinar. On-Demand Recordings can be requested in exchange. Webinar may be cancelled due to lack of enrolment or unavoidable factors. Registrants will be notified 24hours in advance if a cancellation occurs. Substitutions can happen any time. On-Demand Recording purchases will not be refunded as it is available for immediate streaming. However if you are not able to view the webinar or you have any concern about the content of the webinar please contact us at below email or by call mentioning your feedback for resolution of the matter. We respect feedback/opinions of our customers which enables us to improve our products and services. To contact us please email [email protected] call +1-888-717-2436 (Toll Free).
