Biotech Regulatory Compliance Training - Live Webinars, Recordings & CDs

This 90-minute webinar will cover general considerations for microbial control for non-sterile manufacturing areas, including attributes of an effective cleaning and disinfection program. Points to consider specifically aimed at oral solid dose (OSD) manufacturers will also be presented, including cleaning and disinfection of both product contact and non-product contact surfaces.

The webinar will describe application of SPC in manufacturing and QC and how to integrate SPC into the Quality System.

This webinar will give you the tools you need to maintain a quality supply of media and reagents in a variety of microbiology laboratories. A thorough understanding of the variety of challenges necessary in maintain quality media and reagents will be brought to the fore. This will allow you to perform microbiology testing with confidence.

This webinar will provide the basic understanding of how to conduct a compliant and effective out-of-specification (OOS) result investigation which is critical in preventing product recalls, voluntary and involuntary plant shut down, and FDA 483 findings or warning letter. It will also provide a basic mainframe for the Quality Assurance unit in the final disposition of the affected finished product as well as provide guidance for the different types of OOS investigational systems.

This webinar discusses how to execute meaningful Method Transfers by selecting appropriate analytical performance characteristics and acceptance criteria, documentation of the transfer process and how to avoid failures.

This webinar you will discuss how to help your organization get a better handle on what is an “objectionable microorganism, ” exactly how “objectionable” it really is and what you can do to minimize the risk if you find one in your process or product.

This Webinar will discuss how non-compendial biopharmaceutical analytical method transfers can leverage a risk-based approach to address Quality and Regulator concerns. Method transfers using a statistical equivalence approach with tight criteria as frequently suggested by regulators makes it difficult to transfer methods and can result in a high transfer failure rate.

This training program will guide attendees in implementing QbD principles from discovery through product discontinuation. It will also illustrate applying statistics to set specifications and validate measurement systems (assays) and discuss utilizing risk management tools to identify and prioritize potential critical process parameters.

This course will provide a foundation for developing your technical skills related to sterility assurance.

This webinar training will benefit manufacturers of manufactured products to achieve an effective, robust and compliant SOP and STM which will result in a cost effective and efficient manufacturing and testing of products. A well planned and written SOP or STM will reduce the incidence of out-of-specification (OOS) results, failure, product non-conformances, deviation and invalid assay investigations.

This webinar will discuss FDA's current priorities and the agency's likely priorities and the future of regulations and policies in 2017 under the new Trump administration.

This webinar on biopharmaceutical raw material testing will discuss how to implement processes for the control of microbial contamination, establish microbial limits and mitigate the risk of contamination.

This webinar will help the attendee gain an understanding of the requirements of current USP <85> Bacterial Endotoxin Test (BET), European Pharmacopoeia (Chapter 2.6.14) and the Japanese Pharmacopoeia (General Tests, No. 4.01). The webinar will provide the attendee the ability to understand the different LAL testing methodologies, choosing the best test method applicable to the product type, criticality of the BET test result as it applies to the release of a cGMP manufactured product.

This training course will provide a detailed overview of the regulatory requirements, local challenges and important cultural aspects of working with the lifecycle of life science products (pharmaceuticals, medical devices, biologics and combination products) as an importer or producer in Russia. It will offer a deeper understanding of cultural norms, and will discuss best practices for establishing relationships and protecting your intellectual property to be integrated into your company’s training and corporate business strategies.

This webinar on objectionable microorganisms will explore the most current practices that define an objectionable microorganism and will provide a practical approach to determining just how objectionable it really is.

This training program will discuss risk management and outline the requirements for applying risk management to the quality system. It will also discuss how to conduct and implement risk management practices at your firm and review communication techniques to highlight the benefits of risk management.

This webinar will review the CTD format and content requirements for the DMF. It will discuss the transition from other formats to the CTD/eCTD and technical requirements for eCTD submission.

This training program will focus on U.S. FDA and EU's MDD expect documented risk-based VMP planning, though the CGMPs mention little about it. The course will analyze product V&V versus process/ equipment V&V and how to use DQ, IQ, OQ, PQ, and ASTM E2500 equivalents.

This FDA documentation webinar will explain the regulatory expectations for, and the proper design and maintenance of effective and compliant standard operating procedures (SOPs).

This 4-hr webinar will focus on product lifecycle concepts that are applicable to all of the FDA regulated industries. Learn the objectives, purpose and scope of the quality manual and how to can be adapted to each different business environment.